Vapor Honing Key Benefits

 

Attractive Finish

The Vapor Honing process uses a combination of pressurized water and smooth media. The water cushions the impact of the media and also lubricates the action of the media against the surface of the part. This is what gives Vapor Honed components their bright, smooth finish. 

Gentle Process

Unlike bead blasting, which propells potentially destructive media at high speed towards the surface of the part, Vapor Honing is very gentle and is safe to use on threads, engravings and surfaces on which tolerances must be maintained. Vapor Honing is a cold process that, unlike bead blasting, does not generate any heat via friction which can easily cause distortion of the part. Vapor Honing is safe to use on small and thin parts without any worry of damaging them. 

Durability & Longevity

Vapor Honed components retain their appearance due to the peening and sealing nature of the finish. Particularly with aluminum, the pores of the metal are peened closed which prevents future staining and corrosion. This ensures that your components will look attractive and stay clean for many years to come. 

Cleaning

Our process cleans and degreases the part as it finishes it. Oil, grease, dirt and other residue is thoroughly removed from the surface of the part and from below the visible surface of the part from which it may appear later (particularly when heated). 

Polaris colt a 44 year old part before vapor honing 

The same only 1/2 done see the brass brake sensor area they look like new

new featured  clients parts for the month of may 2018 

New picture gallery as of 1/24/18 

This is probably the nasty motors I have seen to date.  What you are looking  at is a 1970 438 polaris fan I did just areas of this to you you the before and after 

23-12-17-5401
23-12-17-5401
23-12-17-5401
23-12-17-5400
22-12-17-4446
22-12-17-4446
IMG_1420
24-12-17-3437
24-12-17-4731
24-12-17-4731
24-12-17-4731
24-12-17-4730
24-12-17-4731
20170416_130119
images
images (1)
images (2)
20180126_125113_1516992674803_001 (1)
20180119_011256_1516568724157_001
20180126_125113
20180125_223022_1516941023512_001
20180125_125016_1516906217111_001
27-1-18-1146
27-1-18-1146
27-1-18-1146
27-1-18-1145
27-1-18-1145
18-1-18-1433
18-1-18-1433
18-1-18-1433
18-1-18-1433
18-1-18-1433
18-1-18-1432
16-1-18-4504
18-1-18-1432
16-1-18-1130
18-1-18-1432

Frequently asked questions

How do I contact you?


Phone ,Text or Live Chat 715-494-0442 bob.




I want to send you my parts What is the process?


Follow these simple steps:

  1. Call me and tell me about what you have? I may request pictures, measurements as my cabinet is only so big ?
  2. All parts should be disassembled fully and cleaned of wet oil, silocone,gasket, and case sealant. It is some times possible to put the entire motor in assembled ? you must make block off plates for intake exhaust remove stator call for details.
  3. Be sure you send your bolts nuts and washers to. Put all nuts washers and lock washers though a wire or zip tie ( galley pic for exmple) and bolts in a zip loc bag this will help keep these items organized. acorn nuts place on stud bolts if desired.
  4. If you are planning on having any machine work done such as Boring cylinders ect have that work done first. if needed to i use a liner in bore
  5. Package all you parts well and mail ups, usps ,speedy ect . I HIGHLY recomend ! you get a tracking number! and or insurance?
  6. When i receive your items i take pictures before and after I will send you pics of your done item for payment approval.




Free sample work  ?


Yes! I can do that under these conditions you pay shipping both ways:

  1. Send one piece side cover head carb ect or old part test piece you have laying around.
  2. Ship to me or deliver I will do half of the part and send it back.
  3. You can included prepaid return shipping label or pay by credit card I will add .05 percent transacton fee to cover return shipping cost.
  4. Make a appointment bring parts see for your self.




have a question Ill be glad to answer it


use this form below Call 715-494-0442 Email aluminumrescue@yahoo.com




what does the service cost


this process is not as expensive as you might think. There are No charges for rinsing drying or packing. an average 38 mm mikuni carb takes 5 to 8 minutes Flat Rate $10 per carb average single cyclinder motors range from $75 to $135 average twins $135 to $180 or triples can range for $175 to $270 Average turn around time 1 to 3 days from the time received




Payment options


Cash,or Credit cards or paypal





Vapor Honing Vapor Blasting by Aluminum Rescue Amery Wi 54001 

Phone 715-494-0442

Email aluminumrescue@yahoo.com

  • w-facebook
  • Twitter Clean
  • White Google+ Icon

Serving all us cities and united states and Canada  with Vapor honing technology  in Wisconsin,Minnesota,Iowa,Illinois,north Dakota,south Dakota,Michigan,Indiana,Ohio,Missouri,Texas,Arkansas,north Carolina,south Carolina,Virginia,Pennsylvania,

22-12-17-4446